Take out the printer from the sealed box with all its key components i.e. cables, cartridges, etc.
The next thing to do is, remove the polystyrene packaging wraps with the orange tapes along with the plastic covering from the printer.
The first thing for hardware setup is to find out the power socket on the printer. As mentioned in Canon Ij Setup guide, plug the power cable to the wall socket and then to the printer’s port.
After that, switch the printer on by pressing the power button. And you will find the printer’s display light on.
For inserting the ink tanks, remove the cartridges outlet seal and the plastic covers covering it.
The printhead carriage will adjust itself once you open the top cover of the printer. Put all the cartridges and put them into their correct slots.
After putting the cartridges into the slots, close the printer top cover and suddenly you will observe that the printer will start making noise. This is the indication that ink cartridge installation is successfully done.
After then, open the flap of the printer and then pull out the input tray and then, put some pages into the paper tray.
Put the paper tray back to its place properly.
This finally finishes the configuration of your Canon Printer via canon.com/ijsetup.
First of all record the unboxing without stopping using any camera device.
Then unbox the printer and separate the box from the printer.
Here in this box, you’ll get a printer, a USB cable, a power cord, user manuals, and separate ink bottles to fill out the ink.
Then check whether the product is in one piece while transport i.e. checks for any damage.
After the confirmation, there will be the connection part.
Connect the power cable to the power socket at the back of the printer and then plug it into the power board.
Now turn it on so that the printer boots for the first time.
It will take time for a first-time boot.
Now open the upper lid of the printer and remove the cartridge.
After this fill it with the link provided within the box.
Now close it and then restart the printer.
Your printer is ready with the unboxing as well as setup part.
Regards, J Wick